The Amazon FBA Profit Formula, Line by Line (2026)
Most FBA calculators get the arithmetic right and the order wrong. They subtract a referral percentage that should have been a maximum, apply it to net revenue when Amazon bills the gross price, and treat storage as a fixed cost when it is a volume multiplied by a rate that doubles in Q4.
Here is the whole chain as it is actually computed — eight lines, two reverse formulas, and a worked example with every number shown.
Start from net revenue, not the price
The number in the buybox is what a customer pays, which in most markets is not what you receive:
net revenue = price ÷ (1 + VAT)
On a US listing the rate is zero, so revenue equals price and people carry that habit into Europe. On a German listing at 19%, a €25.99 price is €21.84 of revenue before a single fee. Every percentage below is anchored to one of these two numbers, and mixing them up is the most common calculator error of all — which is why the fee lines label which base they used.
Referral: a maximum, not a percentage
The referral fee is not price × rate. It is:
referral = max(per-item floor, price × category rate)
The US floor is $0.30, the UK £0.25 and Germany €0.25. On a $3.50 keychain the 15% rate would say $0.53 — fine — but on a $1.20 sticker the floor is what you pay, and a percentage-only spreadsheet has already invented profit.
The rate itself comes from a category table: 15% is the default, but the same table carries 8% for cameras, phones, computers and electronics, 12% for automotive and industrial, 17% for apparel, 20% for jewellery, 16% for watches and a striking 45% for Amazon device accessories. A handful of categories also drop to 8% below a $10 price, which is a rule the flat-rate calculators miss in the other direction.
And note the base: the fee is charged on the gross price, so in a VAT market you are paying a percentage of money that was never yours.
Fulfilment: a box test, then a weight band
Fulfilment is the line people estimate and Amazon measures. The US schedule is a two-key lookup:
- Size tier, from your three dimensions sorted ascending and compared against the tier's own sorted limits. Small standard tops out at 15 × 12 × 0.75 inches and 16 oz; large standard at 18 × 14 × 8 inches and 21 lb; beyond that, large bulky and extra-large.
- Weight band, inside the tier. Small standard runs $3.06 under 2 oz up to $3.60 at 16 oz. Large standard starts at $3.68 and steps through $6.17 at 3 lb, then switches to a base fee plus an increment per half pound — so weight beyond the bands is charged continuously, not in one jump.
Two things fall out of that structure. A product that is 0.8 inches thick instead of 0.7 does not pay a slightly larger small-standard fee; it pays the large-standard table. And apparel carries a surcharge on top, because garments take longer to handle.
If the page gives no dimensions, a weight-only match is used — with one exception: a tier whose limits include a side under one inch is skipped rather than assumed, because guessing the smallest tier under-quotes fulfilment by roughly a dollar. That is a stated assumption, not a measurement — the same reason the batch badges over search results approximate everything.
Storage and inbound placement
Monthly storage is geometry, not a flat fee:
storage = (l × w × h ÷ 1728) × rate × months
The rate is per cubic foot per month, and it is seasonal — in the US, October through December is peak and costs roughly triple the low months. That is why the month is part of the input: the same SKU stored in March and in November is a different number, and a sourcing decision made in September about Q4 inventory should see the November rate.
Inbound placement is a flat per-unit average, switched on explicitly, because a real figure only exists once a shipment plan exists. Treating it as zero is how spreadsheets get quietly wrong about 35 cents a unit; treating an average as a quote is how you get wrong more loudly. The toggle and the label both say which one you are looking at.
Ads and returns, both of price
Both are percentages of the price, so they scale with the number you are trying to set — this is what forces the reverse formulas in section 7 to be divisions rather than subtractions.
Advertising is the honest variable, since your actual ACOS is not visible on a product page; the default in the panel is 10% of price and the field exists to be overwritten with your real number.
Returns are deliberately pessimistic: the model charges the full price as a loss and recovers nothing back. In reality a portion of the referral fee is returned on a refunded order (capped, and only under conditions), so the modelled return line is a conservative boundary rather than an expected value. If your category barely gets returned, your real margin is the shown margin plus a little.
A worked example
A US listing: price $24.99, category "other" at 15%, a unit measuring 8 × 6 × 2 inches at 12 oz, landed cost $4.50 plus $1.20 freight, 10% ads, 5% returns, one month of storage priced in November (peak), inbound placement on.
| Line | Amount | How |
|---|---|---|
| Net revenue | $24.99 | no VAT in the US |
| Referral fee | −$3.75 | max($0.30, 24.99 × 15%) |
| Fulfilment | −$4.15 | large standard, 12 oz band |
| Storage | −$0.13 | 0.056 ft³ × $2.40 × 1 month (peak) |
| Inbound placement | −$0.35 | per-unit average |
| Advertising | −$2.50 | 10% of price |
| Returns | −$1.25 | 5% of price, no fee recovery |
| Product + freight | −$5.70 | landed cost |
| Net profit | $7.16 | 28.7% margin, 125.7% ROI |
Two notes on reading it. The 8 × 6 × 2 unit fails the small-standard box only on thickness, so it lands in the large-standard table — a 0.7-inch version of the same product would have cost less to fulfil. And the storage line looks trivial because it is: on a small, light SKU, storage rarely decides anything. It decides things on bulky items kept for months.
The two reverse formulas
Forward calculation answers "is this profitable". Sourcing asks the opposite question, and the algebra has to invert. Splitting costs into fixed (landed cost, fulfilment, storage, placement) and rates that scale with price (referral, ads, returns) gives:
break-even price = fixed ÷ ( 1 ÷ (1 + VAT) − referral rate − ad rate − return rate )
target price = fixed ÷ ( (1 − target margin) ÷ (1 + VAT) − referral rate − ad rate − return rate )
On the example above, break-even is $14.76 and a 20% target margin asks $20.66. Both can go negative-in-the-limit, which is the formula's most useful output: if the denominator collapses to zero or below, no price makes the SKU profitable, because the rates eat the whole unit. A $1 item with 25% ads, 10% returns and 15% referral has a 50% variable drag; the answer is not a higher price, it is a different product.
The reason the VAT term sits inside the denominator is that in a tax-inclusive market a price increase raises the tax you remit as well as the fee. Solving for a target margin without that term systematically under-prices European listings.
What no formula can know
- Your measured weight. Amazon re-weighs and re-measures in the fulfilment centre and bills what it finds, including dimensional weight where it applies. The table is a schedule; the input is your estimate of what you will be charged.
- Category exceptions. Rates vary by sub-category and change; a product classified as one thing and listed under another gets billed as the listing.
- Programme fees. Subscribe & Save, bulk discounts, high-volume listing replies, returns processing and long-term storage surcharges all live outside a per-unit margin.
- Your real advertising. The number on the page is an assumption until you type your own.
Every one of these is why a good calculator shows its lines instead of its answer, and lets you override any fee by hand. A single "profit" number you cannot interrogate is a guess wearing a currency symbol.
FAQ
Is the referral fee charged on the price the customer pays or on my net revenue?
On the price the customer pays. In a market where the displayed price includes VAT, the fee is a percentage of the gross number while your revenue is the gross number divided by one plus the VAT rate. That asymmetry is the single largest reason a European margin looks better in a spreadsheet than it is.
Why is the minimum referral fee written as a maximum?
Because Amazon charges the greater of the two: the category percentage, or a per-item floor. On a very cheap item the floor is what you actually pay, so profit is computed as max(floor, price times rate). Writing it as a percentage alone under-states the fee on low-priced SKUs, sometimes by a wide margin.
What is the difference between margin and ROI here?
Margin is net profit divided by net revenue — it answers how much of each sale you keep. ROI is net profit divided by the money you actually laid out per unit, cost plus inbound freight — it answers how hard that cash works. A high-margin, high-cost SKU can have a mediocre ROI, and a thin-margin consumable with cheap landed cost can have the reverse.
Does the break-even price include advertising?
Only if you entered an ad percentage, because ad spend is modelled as a share of price and therefore scales with the price you solve for. That is what makes the formula a division rather than a subtraction: fixed costs are spread over a variable rate. If you leave the ad field empty, break-even assumes no advertising cost at all.
More guides in the VKT blog; questions to support@annmax1983.com.
